Support Links
- Support Home
- Support Videos
- Contact Support
- Warranty & Returns
- Shipping Information
- Software Downloads
Related Links
- iMic Support
- iMic Product Page
-
Manuals
-
Final Vinyl 2.0
Manual for Final Vinyl 2.0 in PDF format. -
iMic Quick Start Guide
For iMic (hardware only) in PDF format. -
Final Vinyl 2.5
Manual for Final Vinyl 2.5 in PDF format.
-
Final Vinyl 2.0
-
Downloads
-
Final Vinyl (Mac) - Release [2.5.1]
- For Macs running 10.4 and 10.5.
- Fixed a problem that prevented the effects list from working properly under Mac OS X 10.4.
- Fixed a problem where interrupting Save could cause Final Vinyl to crash.
- Fixed a problem where closing the window while the waveform was being rebuilt could cause Final Vinyl to crash.
-
Final Vinyl (Mac) - Release [2.5.1]
I've plugged in my $150 mic and it doesn't work. (Mac and PC)
The iMic was configured for Mic and Line Level devices, such as standard computer microphones and tape decks. Those devices (and there are many types) typically are high impedance products that connect via unbalanced cables. Many, if not most, professional or higher end microphones are low impedance products that connect via balanced cables. Those types of devices require preamplification to bring them up to Line Level. This can be accomplished by using the pre-amps of mixing consoles or by using an impedance matching transformer. If you don't have a mixer, the transformers are readily available at electronic supply houses and consumer outlets such as Radio Shack.
